VRS06 The Grand Staircase
28mm Scale.Resin & Brass model.
Foamboard or Foamcard NOT INCLUDED
Recommended room dimensions. 5mm Foam-card or board. Floor, 150mm x140mm.
Rear Wall 140mm long x 140mm high, You will need to cut a 28mm wide x 40mm hole 5mm above the bottom edge and 15mm from the right hand side to accommodate the door.
Side wall 155 mm wide x 140mm. You will need to cut a 28mm wide x 40mm hole 5mm above the bottom edge to accommodate the door and 5mm from the left hand edge,.Also think about whether this wall will be placed on the left or right hand side, depending on the overall layout of the building you have in mind.
Contents
1 Reain Staircase and Brass bannisters
The Figure is a 28mm Royal Naval Officer from COPPLESTONE CASTINGS & is available from Northstar Figures