VRS01 The Library
28mm Scale.Resin & Whitemetal models.
Foamboard or Foamcard NOT INCLUDED
Large Library. Recommended dimensions. 5mm Foam-card or board. Floor, 200mm x140mm.
Rear Wall 200mm long x 85mm high. You will need to cut in the centre a 40mm by 2mm slot, 5mm above the bottom edge & directly above that in the centre a 28mm long x 19mm rectangle to fit the fireplace in properly, so that it sits on the floor and slots into the wall.
Side wall 140 mm wide x 85mm. You will need to cut a 28mm wide x 40mm hole 5mm above the bottom edge to accommodate the door. You can place the door where you think best. The one in the picture was cut 75mm from the rear wall (overall interior length70mm) Also think about whether this wall will be placed on the left or right hand side, depending on the overall layout of the building you have in mind.
6 Bookcases, 3 Large books, 3 medium books.
Ornamental fire place with chimney breast and log insert
Cluttered Table with books
2x Medium Sofas
2x Wingback chairs
1x Desk and Chair
1x Grandfather Clock
2 x Table lamps
1 x Large globe
1 x Small globe.
1 x Door
1 x Medium picture frame
Individual items would cost £56.00
The Figure is a 28mm Royal Naval Officer from COPPLESTONE CASTINGS & is available from Northstar Figures